Air source heat pump
The Vitocal 150-A is an air source heat pump in monoblock design
Rated heating output
2.6 to 14.9 kW
Highly suitable for modernisation
With 70 °C flow temperature (at an outside temperature down to -10 °C)
Climate Protect +++: Protects the environment and the climate
Environmentally responsible, natural refrigerant R290 (propane) with a particularly low GWP100 (global warming potential) of 0.02
OptiPerform
Reliable operation with high efficiency
Service Link
Guaranteed faster response time if a service is required
Low running costs due to high efficiency
COP (coefficient of performance) to EN 14511: up to 5.0 (at A7/W35)
60 % less space required
Compared to comparable models
Cooling function
Heating and cooling in one
Integrated energy management system
Ensures transparency in energy consumption and costs
Easy operation via ViCare app
Easy operation via ViCare app
Highly suitable for modernisation: Vitocal 150-A
The new generation of heat pumps
Reliable, compact and more environmentally responsible than ever – the new, innovative heat pump technology from Viessmann makes particularly efficient use of environmental energy for heating and cooling. With a flow temperature of up to 70 °C, the Vitocal 150-A was specially developed for modernisation projects. Existing radiators can continue to be used. Underfloor heating is not essential. High energy efficiency, convenient control via app, sustainable operation and attractive design are all convincing features.
Benefits of the Vitocal 150-A
Climate Protect+++ protects the environment and the climate
The new heat pumps in the Vitocal 15x series use the "green" refrigerant R290 (propane), which is considered particularly environmentally responsible with its very low GWP100 (global warming potential) of 0.02.
OptiPerform –– reliable operation with maximum efficiency
The advanced heat pumps from Viessmann work with a patented hydraulic system. With Hydro AutoControl®, the heat pump is operated reliably and with maximum efficiency throughout its entire service life. The unique design not only ensures that your contractor can set up the heat pump with OptiPerform much faster and, therefore, more cost effectively. It also takes up much less space because it is up to 60 percent smaller than comparable systems.
Service link - quick service response times
Heat pumps with a service link use wireless technology to automatically notify the trade partner of any possible faults. Completely free of charge. This eliminates unnecessary travel, as on-site servicing is quicker. Saving time and money.
Product details
- Rated heating output (kW), operating point A7/W35 (to EN 14511)
-
Type 150.A10: 7.3 kW | type 150.A13: 8.1 kW | type 150.A16: 9.1 kW
- Coefficient of performance ε (COP) A7/W35
-
Type 150.A10: 5.0 | type 150.A13: 4.9 | type 150.A16: 4.9
- Energy efficiency ƞs*
-
Energy efficiency ƞs at W35 in %: Type 150.A10: 190 | type 150.A13: 178 | type 150.A16: 178
*Heating performance data in line with Commission Regulation (EU) No 813/2013 under average climatic conditions for low temperature application (W35) and medium temperature application (W55)
- Energy efficiency class, DHW heating
-
-
- Application area
-
Detached houses, modernisation projects
- Operation
-
Heat pump control unit with 7 inch colour touchscreen, operation via ViCare app possible
- DHW heating
-
Additional DHW cylinder required, resulting in a high level of DHW convenience.
- Additional features
-
For room heating/cooling and DHW heating | Maximum flow temperature: 70 °C (at an outside temperature of down to ––10 °C) | Monoblock indoor unit with heat pump control unit, high efficiency circulation pump for the secondary circuit, 4/3-way valve, safety assembly | Integral instantaneous heating water heater | Integral heating water buffer cylinder and overflow valve
- Product cross-section, indoor unit
-
- Product cross-section, outdoor unit
-
